Raymarine hsb2 PLUS Series - Customizing the Screen Presentation Options

Chapter 2: Getting Started & Adjusting the Display 2-13
Customizing the
Screen Presentation
Options
Customizing the Screen Presentation Options
TheSCREEN softkey letsyouswitchthefollowingscreenpresentationoptions
on or off:
Radar:
Chart:
Switching the Cursor Data Box On and Off
Thecursordataboxprovidesthecursor’spositioninlatitude/longitudeand/or
bearing/range.If you wish to see a full image,you can switch the data box off.
➤ To control the cursor data box:
1. Press the SCREEN soft key.
2. PresstheCRSR BOX softkeytotogglethesettingfromOFF toON orfromON
to OFF.
3. To returnto the defaultsoft key display, press ENTER.
➤ Youcanusethecontextsensitivecursortoselectandmovethecursordatabox
(the label BOX is displayed). See Moving and deleting items with the context-
sensitive cursor on page 1-17
Switching Radar Range Rings or Chart Grid On and Off
The radar range rings can be turned on or off. They are normally left on, but
youmaywishtoturnthemoffifyouareusingVRM/EBLsorguardzones(see
Section 3.4 and Section 3.5) to make the displayclearer.
The Chartplotter display includes grid lines of latitude and longitude which
you can use to help determinepositionon the chart. The grid linescan be
switched on if required.
Ifyou are in Chart mode the RNGE RNGS softkeyis replacedbythe CHRT GRID
soft key.
➤ To turnthe range rings or chart gridon or off:
1. Press the SCREEN defaultsoft key.
2. PresstheRANGE RINGS or the CHRT GRID softkey to togglethesettingfrom
OFF to ON or from ON to OFF.
To returnto the defaultsoft key display, press ENTER.
D3643-2
SCREEN
CRSR BOX
OFF ON
RNGE RNGS
OFF ON
DATABOXES
OFF ON
WAYPOINT
OFF ON
D4177-1
CRSR BOX
OFF ON
CHRT GRID
OFF ON
DATABOXES
OFF ON
CUSTOM
OFF ON
SCREEN
CRSR BOX
OFF ON
BOX
SCREEN
RNGE RNGS
OFF ON
81186_3.book Page 13 Thursday, August 22, 2002 8:23 AM