Raymarine hsb2 PLUS Series - Display Unit Connection

8-12 hsb
2
PLUS Series LCD Display
Display Unit
Connection
Display Unit Connection
The rear of the display provides the followingconnection sockets:
• Scanner(antenna) connection
•
hsb
2
,in/outconnectorforconnectingtoanotherhsb
2
orHSBseriesdisplay.
• SeaTalk,for SeaTalkdatainputand outputand connectingtoanother
hsb
2
seriesdisplay(such as a chartplotter or second radar display).
• NMEA Output, for NMEA data output in an integrated system.
• Power/NMEAInput, for 12V, 24 V or 32 V DC power connection, two
NMEA 0183 inputs and one RF ground (screen) connection.
Figure 8-5: Radar Display Connector Panel
Thefollowingsectionsdetailthe displayunitconnectorsusedwheninstalling
a single
hsb
2
seriesdisplay.The remaining connectordetailsare providedin
Section 8.8.
NMEA
OUT
POWER/NMEA
TRANSDUCER
SeaTalk
HSB
R
G
Y
To NMEA instruments
NMEA IN 2
D5576-1
POWER IN
NMEA IN 1
To other hsb
2
displays
To SeaTalk
instruments/GPS
To radar scanner unit
81186_3.book Page 12 Thursday, August 22, 2002 8:23 AM