3-18 hsb
2
PLUS Series LCD Display
Controlling VRM/EBL
Data Boxes
Controlling VRM/EBL Data Boxes
Each VRM/EBL data box is switched on and off with its associatedVRM/
EBL. However, when one or both VRM/EBLs are active, you can move the
databox(es) and you can switch the data box(es) offat any time.
➤ Youuse the contextsensitivecursor to selectand movea VRM/EBL databox
(the label BOX appearsunder the cursor). See Moving and deleting items with
the context-sensitive cursor on page 1-17.
➤ To control the VRM/EBL data boxes:
1. Press VRM/EBL to display the VRM/EBL soft keys.
2. PresstheVRM/EBL DATABOX softkeytotogglethesettingfromOFF toON or
from ON to OFF.
Note: VRM/EBL data boxes are not affected by the setting of the DATABOXES
soft key accessed using the SCREEN default soft key. This only controls the set
of data boxes available for integrated systems (see Chapter 2).
BOX
VRM/EBL
VRM/EBL
DATABOX
OFF ON
81186_3.book Page 18 Thursday, August 22, 2002 8:23 AM
To Next Page
Loading...
