Chapter 1: Overview 1-15
Chartplotter
Functions
Chartplotter
Functions
ON: Charttext, chart boundaries, depthcontours,navigationmarks
and land features.
OFF: Cautionand routing data.
CUSTOM: Spot sounding, light sectors, marine features.
Note: The factory default for the CUSTOM settings is ON.
Iconsare displayedin detail,depth shading limit is 10 m and depth contour
displayis 0-100 m.
A complete list of chart features is given in Appendix C.
Chartplotter Functions
The Chartplotter includes the following functions:
• Display C-MAP NT C-Card chart information including Ports and Tides
(if available)
• View chart information (if available) for the Nearest Port
• Place,Move, Erase and Edit a Waypoint
• Goto Waypoint or Cursor
• Create, Save, Name, Edit and Follow a Route
• Review Route and WaypointLists
• Display vessel’s track;Save and Name the Trackfor re-callto screen
• SmartRoute to make a track intoa route
• MeasureChart Distancesand Bearings on-screen
• Set Up Alarms and Timers
• Man OverBoard(MOB) to navigate back to a missing personor object
• Differential GPS set up page
Operationof thesefunctions is described in Chapter 5 and Chapter 6.
81186_3.book Page 15 Thursday, August 22, 2002 8:23 AM
To Next Page
Loading...
