7-20 hsb
2
PLUS Series LCD Display
Object Information
Object Information
You can set Object Information ON ALL, ON POINTS or OFF to determine when
an object identification pop-up is displayed. When set to ON ALL,the
information pop up is displayed when the cursor is placed over any chart area
fortwoseconds.ON POINTS enablestheinformationpopupwhenthecursoris
placedover a displayed chart object and OFF disables the information pop up.
Waypoint Options
Waypoint Symbols controlswhether or not the waypoints are shown on the
Chart display, with their appropriatesymbols. The activewaypoint, and
waypointsin the currentroute are always shown.
Waypoint Numbers controls whether or not the waypoint numbers are
shown for any waypoints in the current route.
DefaultWaypoint Symbol lets you selectthe symbol you want used for
waypointdisplay.
Vectors
Heading,Tideand Course Over Groundvectors can be displayed as a line
from your vessel. The length of the vector is determinedby your choice of
SOG and the time period. An infinite vector extendsto the edge of the chart
screen.
Heading Vector indicates your current heading.
COG Vectorindicates your course over ground.
Tide Vector indicates the tideangle. Tide informationis calculatedfrom the
speedthrough water, compass and positiondata.
Radar/Chart Synch
If you have a combined radar/chartplotter displayyou can selectRadar/Chart
Synch ON or OFF.WhensetON with chart and radarwindows displayed,FIND
SHIP can be usedto synchronize the radar and chart images.
The chartis redrawn so that its center matches that of the radar display. The
radar is redrawn to the scale and heading mode of the chart.
Datum Selection
You can selecteither WGS 84 orLOCAL datum. In LOCAL mode, you are
presentedwith a list of datums;use the trackpadto scrollthroughthe list,then
press ENTER to select the option and close the menu.
81186_3.book Page 20 Thursday, August 22, 2002 8:23 AM
To Next Page
Loading...
