8-2 hsb
2
PLUS Series LCD Display
Planning the
Installation
Note: If you wish to practice using the display before installation, connect a
12V or 24V DC power supply (connecting the red wire via a 6.3A quick blow
fuse to positive and the black wire to negative) and using the simulator mode,
as described in Chapter 2.
Forfullfunctionalityoftheradarandchartplotteryouneedtoprovideposition
and heading data.
• Orientation- heading data is required for the radar to operatein North Up
and Head Up mode and the chart to operatein Course Up and Head Up.
• MOB requires heading and speed data. Alternatively, SOG and COG
(derivedfrom the same source as position data) enable the MOB function.
• MARPArequires accurate heading data; full MARPA functionality is pro-
vided if SOG and COG are also available.
• Position data is required for full functionalityof the chartdisplay.
Full details of heading, positionand other data are given in Section 8.8.
Planning the Installation
Beforeyou install your system, plan the installation, considering:
• Location of the display unit, as described in Section 8.3.
• CableRuns, includingcablesfor an integratedsystem (to provide heading
and position data etc.), as describedin Section 8.4.
EMC Installation Guidelines
All Raymarine equipment and accessoriesare designed to the best industry
standardsfor use in the recreationalmarine environment.
Their design and manufactureconforms to the appropriateElectromagnetic
Compatibility (EMC) standards,but correctinstallationis required to ensure
thatperformanceisnotcompromised.Althougheveryefforthasbeentakento
ensurethattheywillperformunderallconditions,itisimportanttounderstand
what factorscouldaffectthe operation of the product.
The guidelines given here describe the conditionsfor optimum EMC
performance,butitisrecognizedthatitmaynotbepossibletomeetallofthese
conditions in all situations.To ensure the bestpossible conditions for EMC
performance within the constraints imposed by any location,alwaysensure
themaximum separationpossible between different items of electrical
equipment.
For optimumEMC performance,it is recommendedthat whereverpossible:
• Raymarineequipment and cablesconnected to it are:
81186_3.book Page 2 Thursday, August 22, 2002 8:23 AM
To Next Page
Loading...
