Raymarine hsb2 PLUS Series - Clearing the Current Track; Managing Tracks

5-40 hsb
2
PLUS Series LCD Display
Clearing the Current
Track
Press ENTER to return to the track soft keys.
2. Press the TRACK OFF ON soft key to toggle tracks on.
Your vesselstrail willbe displayedon-screen,with a line joining the
pointsat the selectedinterval.
Clearing the Current Track
You can clear the current track from the screen.When you select CLEAR
TRACK,ifthecurrenttrackhas not been saved, you havethe optionofsavingit.
➤ To clear the current track:
1. Press the CLEAR TRACK soft key.
2. If the track has not been saved the SAVE TRACK soft keys are displayed.
To clear thetrack without saving it in the TrackList, press NO.
To save the track in the list, press YES.The Name track softkeys are dis-
playedandyoushouldcontinueas describedin the followingsection,Sav-
ing and Naming a Track.
Press CLEAR to abort the Clear Track operation.
The current track is clearedfrom the screenand the defaultsoft keys are
displayed.
Managing Tracks
Althoughitiseasytosetupatrack,andthistrackisretainedevenifyouswitch
offyour display, you can store a number of different tracks so that you can
reviewthematalaterdate.Thissectionexplainshowtoperformthefollowing
tasks:
• Save and Namea track.
• Name, Erase and Show an existing track.
Saving and Naming a Track
You can save up to 5 named tracksin the TrackList. These tracks can be re-
displayedat a later date.
➤ To saveand name the current track:
1. Pressthe MORE softkeyfollowedbytheTRACK LIST softkey. The tracklist
pop-upand associated soft keys are displayed.
2. The nextavailableentry on the tracklist is highlighted.
(If required, you can use the trackpad to select another positionin the list;
thiscan be a blank slot, or an existingtrack that you no longer require).
D5674-1
TRACK
LIST
MORE¬
TRACK INTERVAL
0.1nm
TRACK
OFF ON
CLEAR
TRACK
SAVE
TRACK
TRACK
LIST
81186_3.book Page 40 Thursday, August 22, 2002 8:23 AM