Raymarine hsb2 PLUS Series - Hsb 2 PLUS Series LCD Display

3-26 hsb
2
PLUS Series LCD Display
Using MARPA
Acquire a Target
➤ To acquire a target:
1. Press the MARPA soft key to display the ACQUIRE TARGET soft keys.
2. Positionthe cursoroverthe requiredtargetand pressthe ACQUIRE TARGET
softkey.
The symbolis placedat the cursor positionandthe radarsearchesfor a
targetatthe cursorposition.If a targetis presentforseveralscans the radar
locksonto it and the symbol indicates a safe target, the target vector is
alsodisplayed.Ifthetargetiscontinuouslylost,thelosttargetsymbol is
displayedand a Lost Targetalarm is generated;press any key to cancelthe
alarmand remove the lost targetsymbol from the display.
3. Press ENTER or CLEAR to returnto the default display.
Cancel a Target
➤ To cancela target using the context-sensitive cursor:
1. Move the cursor over the target, the following soft keys are displayed.
2. PresstheCANCEL TARGET softkeytocanceltargettrackingandremovethe
symbol from the display. The default soft keys are displayed.
➤ To cancel a target from the database list.
1. Pressthe defaultsoft key MARPA to displaythe MARPA soft keys.
2. Press the MARPA LIST softkey, the database list is displayed.
3. Use the trackpadto select a target,then press the CANCEL TARGET soft key
to remove the selected target.
4. Press CLEAR to remove the database list.
TARGETS SCREENHDG MODE
D4126_1
MARPA
D4120_1
CANCEL
TARGET
ACQUIRE
TARGET
MARPA
LIST
MARPA BOX
OFF ON
ACQUIRE
TARGET
D4119_1
CANCEL
TARGET
MARPA BOX
OFF ON
CANCEL
TARGET
MARPA
LIST
CANCEL
TARGET
81186_3.book Page 26 Thursday, August 22, 2002 8:23 AM