Raymarine hsb2 PLUS Series - Page 128

5-30 hsb
2
PLUS Series LCD Display
Follow a Route
You should always check the target waypoint before initiating a follow
route.
➤ To follow thecurrent route:
1. Press the GOTO default soft key. TheGoto/Followsoft keys are displayed.
2. Press the FOLLOW ROUTE soft key.
Alternatively, to follow a route:
1. Placethecursorovera routeleguntilthelettersRTE andthe routesoftkeys
aredisplayed thenpress FOLLOW ROUTE.
Your vessel’s current position becomes the origin, and the targetwaypoint in
thecurrent route becomes the activetarget.
The soft keys change as follows:
Theseoptions are described in the following sections.
➤ To follow the current route in reverse:
1. Press the ROUTE defaultsoft key, followed by MORE. The route soft keys
aredisplayed.
2. Press the REVERSE ROUTE soft key. The currentroute is reversedon the
screen. Press ENTER or CLEAR.
3. Press the GOTO default soft key. TheGoto/Followsoft keys are displayed.
4. Press the FOLLOW ROUTE soft key.
The soft keys change as follows:
Theseoptions are described in the following sections.
Alternatively:
1. Placethe cursor over the route leg until the letters RTE and the route soft
keys are displayed.Press REVERSE ROUTE then FOLLOW ROUTE.
Your vessel’s current position becomes the origin, and the targetwaypoint in
thecurrent route becomes the activetarget.
GOTO
FOLLOW
ROUTE
RTE
FOLLOW
ROUTE
D4251_1
CLEAR
ROUTE
REVERSE
ROUTE
EDIT
ROUTE
STOP
FOLLOW
ROUTE
REVERSE
ROUTE
GOTO
FOLLOW
ROUTE
D4172-1
RESTART
XTE
WAYPOINT
ADVANCE
GOTO
CURSOR
STOP
FOLLOW
RTE
REVERSE
ROUTE
FOLLOW
ROUTE
81186_3.book Page 30 Thursday, August 22, 2002 8:23 AM