1-8 hsb
2
PLUS Series LCD Display
Operating Modes
Operating Modes
Half-Screen Window Options
• Chartdisplay, Radar display:If data is availableas a function of the
combineddisplay unit it can be displayed full screen,as shown in
Figure 1-2, or in a half-screenwindow.
• CDI:This gives the Course Deviation Indicatorgraphicaldisplay, with
datarelating to the target waypoint.
• BDI:ThisgivestheBearingandDistanceIndicatorgraphicaldisplay,with
datarelating to the target waypoint.
• NavData: This showsninedata boxes,providingnavigationaldata in the
unitsspecifiedin your set up. Note that up to6 of these data boxesare also
available as a user-selectable group (see Section 7.3).
You select the operating mode and windows using the DISPLAY key as
describedin Chapter 2.
Multi-display systems
If you have several hsb
2
seriesRadar and Chartplotter displays connected
operation is similar to acombined Pathfinder Radar/Chartplotter Unit: three
full-screen modes – radar, chart and data log are available on all displays.
In addition, if you have an hsb
2
seriesFishfinderdisplayconnected,you can
setanydisplaytofishfindermode;ifthesystemincludesachartplotter,similar
functionalityto a combined Fishfinder/Chartplotteris availableon all
displays.
On an
hsb
2
systemwith Radar, Chart and Fishfinderavailable,the following
information canbe shown on any display unit:
For detailson the fishfinder, refer to the
hsb
2
Series Display Owner’s
Handbook suppliedwith your fishfinder.
Table 1-2: Window Options for Integrated Systems
Full-screen mode Half-screen Window Options
Chart Mode, CDI, BDI, Nav Data, Fishfinder or Radar
Radar Mode CDI, BDI, Chart or Nav Data
Fishfinder Mode Depth/temp, Chart or CDI, BDI
Data Log Mode Windows not available
81186_3.book Page 8 Thursday, August 22, 2002 8:23 AM
To Next Page
Loading...
