Chapter 1: Preparing for Installation 6-1-7
ST290 Instrument System Owner’s Handbook
Suppression Ferrites
The following illustration shows typical cable suppression ferrites used
with Raymarine equipment. Always use the ferrites supplied by
Raymarine.
Connections to Other Equipment
Ifyour Raymarineequipment isto beconnected toother equipmentusing
a cable not supplied by Raymarine, a suppression ferrite MUST always
be attached to the cable near to the Raymarine unit.
Data Processing Unit
Figure 1-1: DPU dimensions
D3548-2
D5536-1
5.9 in (150 mm) 1.53 in
(39 mm)
5.12 in (130 mm)
81183_2 S6.book Page 7 Wednesday, May 7, 2003 11:27 AM
To Next Page
Loading...
