Chapter 2: ST290 Graphic Display 2-2-11
ST290 Instrument System Owner’s Handbook
2.4 Chapter & page details
The salient points of the Graphic Display chapters and pages are
summarized here. Use the Glossary in Section 9 of this handbook as
necessary, for descriptions of the abbreviations used.
Speed chapter
The chapter menu title is SPEED and the pages are summarized in
Table 2-1 .
Resetting speed values
To reset the average speed, maximum speed or trip log:
1. In the Speed chapter, select the appropriate page (AVG SPEED, MAX
SPEED or TRIP LOG).
2. Hold down the button for 2 seconds. After 1 second the displayed
value flashes and after 2 seconds it resets. AVG SPEED and MAX SPEED
reset to the current speed value; TRIP LOG resets to zero
If you decide not to reset a value, release the button before
2 seconds has elapsed, to retain the current value.
Table 2-1: SPEED chapter pages
Page content Description
SPEED Boat speed, in KNOTS, miles per hour (MPH) or kilometers per hour
(KM/H)
AVG SPEED Average speed, in KNOTS,MPH or KM/H
MAX SPEED Maximum speed, in KNOTS,MPH or KM/H
TOTAL LOG
Total log, in statute miles (SM), kilometers (KM) or nautical miles (NM)
TRIP LOG
Trip logs, 1 to 5. Each shows distance in SM, KM or NM
VMG TO WIND Velocity made good to windward, in KNOTS,MPH or KM/H
VMG TO WP Velocity made good to waypoint, in KNOTS,MPH or KM/H
SPEED(graph)
Graph showing speed history
81183_2 S2.book Page 11 Tuesday, May 6, 2003 8:39 AM