7-2-24 Section 7: System Setup
ST290 Instrument System Owner’s Handbook
Figure 2-23: Wind vane calibration (Graphic Display)
Aligning
To align the wind vane:
1. Select the ALIGN VANE page (see Figure 2-23 ).
2. Either:
• Use the or button to manually set the correct wind vane
direction
or
• Motor directly into the wind, then hold down the button for
1 second to set the vessel’s heading as the alignment value.
Note: On a calm day, motor fast enough to ‘create your own wind’.
From Compass calibration
To Speed calibration
D5977-1
81183_2 S7.book Page 24 Wednesday, May 7, 2003 1:52 PM
To Next Page
Loading...
