Raymarine St290 - Procedure

Chapter 3: Setting up Data Displays 7-3-5
ST290 Instrument System Owner’s Handbook
• NO. This sets the upper and lower display areas to operate sepa-
rately, so the upper and lower display areas each has a group of
Favorite pages which can be selected independently.
• The remaining Favorites setup pages enable you to define the data
you will see on the operational Favorite pages. You can define sepa-
rately what is displayed in the upper and lower display areas. The
trend arrows indicate which display area you are setting up, i.e. the
increase arrow indicates you are setting the upper display area, and
the decrease arrow, the lower.
Allthepages in the Data DisplayFullprofileare available.Inaddition
to these, if ST290 is connected to a computer running Raymarine
RayTech, the RayTech pages are also available to be allocated as
Favorite pages.
Procedure
To set up your Favorite pages:
1. In User Setup, select the FAVORITES setup chapter. The PAGES setup
pageis displayed(see Figure 3-6 ), with the number of Favoritepages
flashing, to indicate you can change it.
Figure 3-6: Setting required number of Favorite pages
2. Use the or button to set the required number of Favorite pages,
from1to5.
3. Press the button to move to the LINKED setup page (see
Figure 3-7 ) and use the or button to select either nO to unlink,or
YES to link, the upper and lower screen areas when Favorite pages are
displayed.
D5771-1
FAVORITES
PAGES
SETUP
81183_2 S7.book Page 5 Wednesday, May 7, 2003 1:52 PM