2-3-4 Section 2: Using Digital Instruments
ST290 Instrument System Owner’s Handbook
To define which information you want in the Favorite chapter, refer to
Section 7, System Setup.
Setting Favorite operating method
During Normal operation, you can choose how the Favorite chapter
operates. This is either:
• Manually. The Favorite chapter operates like any other chapter, i.e.
each Favorite page is selected using the button,
or
• With an automatic rollover. Each page is displayed for a period of
time you set up, then the next page is automatically displayed.
To set the method of Favorite page display:
1. Select the Favorite chapter.
2. Hold down the button for 1 second, to display the Favorite roll-
over setup page (Figure 3-3 ).
Figure 3-3: Set Favorite rollover page
3. Use the or button to set the mode you want:
• Ifyouwanttousethe buttontoselecttheFavoritepagesman-
ually during Normal operation(i.e.without a roll around), choose
0.0
• If you want the Favorite pages to rollover automatically, set the
time you want each page to be displayed (between 0.5 and
20 seconds).
4. Hold down the button for 1 second, to save and return to Normal
operation.
D6059-1
FAVORITE U
ROLLOVER SEC
81183_2 S2.book Page 4 Tuesday, May 6, 2003 8:39 AM
To Next Page
Loading...
