Raymarine St290 - Docking Display

2-2-8 Section 2: Using Digital Instruments
ST290 Instrument System Owner’s Handbook
Figure 2-8: Wind shift display
To set the required apparent wind angle to a specified value:
1. Hold down the button for 1 second, to enter edit mode. The
TARGET value flashes.
2. Use either the or button to set the required apparent wind angle,
as the TARGET value.
3. Hold down the button for 1 second to leave edit mode.
To set the required apparent wind angle to the current wind angle, press
the button.
Docking display
A docking display (in the WIND chapter) shows the prevailing wind and
tide conditions with respect to your vessel, and a rudder angle indicator,
to aid docking.
Figure 2-9: Docking display
D6058-1
Steer bar
Your boat
Set this to the
REQUIRED
apparent
wind angle
Required
(TARGET)
apparent
wind angle
ACTUAL
apparent
wind angle
D6057-1
Rudder angle
indicator
Wind direction
with respect to
your vessel
Tide direction
with respect to
your vessel
Beaufort
wind speed
Your vessel
81183_2 S2.book Page 8 Tuesday, May 6, 2003 8:39 AM