Section 1: An Introduction to ST290 1-1-11
ST290 Instrument System Owner’s Handbook
MOB Keypad
Data Processing Unit
Transducer Pods
Approvals
CE - conforms to 89/336/EEC, tested to BS EN 60945.
Current consumption 47.2 mA maximum
Connectors 2 x SeaTalk (3-pin plug)
Dimensions: 4.9 in x3.1 in x 1.7 in (124 mm x 78.5 mm x 41 mm)
Weight: 0.51 lb (230 g)
Current consumption 250 mA maximum
Dimensions: 5.9 in x 5.12 in x 1,53 in (150 mm x 130 mm x 39 mm)
Weight: 0.52 lb (235 g)
Connectors
SeaTALK
2
(spring retention connectors)
SeaTalk (spring retention connectors)
Power input (spring retention connectors)
NMEA 2000 (spring retention connectors)
NMEA 0183 (spring retention connectors)
Auxiliary alarm (spring retention connectors)
USB (series B plug)
Current consumption 50 mA nominal
Dimensions: 2.6 in x 4.62 in x 1.44 in (66 mm x 117.5 mm x 36.5 mm)
Connectors
2 x SeaTALK
2
(spring retention connectors)
Transducer connectors (spade terminals)
Weight: 0.31 lb (140 g)
81183_2 S1.book Page 11 Tuesday, May 6, 2003 8:53 AM
To Next Page
Loading...
