Chapter 3: ST290 Data Display 2-3-3
ST290 Instrument System Owner’s Handbook
2. Press the button, to enter Chapter Select mode. In Chapter Select
mode,thetitleof the currently-selected chapter is displayed, centered
horizontally.
Note: The Chapter Select mode times out to Normal mode if there are no
button presses for 5 seconds.
3. Whilein Chapter Select mode, press the button to cycle through
the chapter names, until the name of the chapter you want is dis-
played:
• Press the button,to move in one direction through the chapters
or
• Hold down the button for 1 second or more, to move in the
opposite direction through the chapters.
4. Either wait for the 5 second time out, or press the button, to return
to Normal mode. The page first displayed in your newly-selected
chapter depends on which First Page option is set up. It is either:
• The page that was last displayed when the chapter was last used.
or
• The top page in the chapter (as shown in the profile diagrams).
To set the required First Page option, refer to Section 7, System Setup.
Pages
In Normal mode, use the button to change pages, in the selected
chapter. Press it, to move in one direction through the pages, or hold it
down for 1 second or more, to move in the opposite direction.
Using Favorite pages
The Favorite chapter enables you to group together in one chapter,
information you use most often. You can include information from any
other chapter, to form a Favorite chapter of up to five pages. The Favorite
chapter title is FAVORITE U for the upper display area and FAVORITE L for
the lower
To see the Favorite pages, use the button to select the Favorite chapter
and the button to select the required Favorite pages.
Note:If the Favorite chapter is set to operate with an automatic rollover,
the button has no effect.
81183_2 S2.book Page 3 Tuesday, May 6, 2003 8:39 AM
To Next Page
Loading...
