7-2-14 Section 7: System Setup
ST290 Instrument System Owner’s Handbook
To set up each option:
1. With the general options page displayed (Figure 2-14 ), use the or
button to highlight the option you want to set.
2. Hold down the button for 1 second to enter edit mode. The
selected option then flashes.
3. Use the or button to setthe selected option to thevalue you want.
4. Hold down the button for 1 second to save the value.
Setting trip counters
Figure 2-15: Trip counters setup
To set up the trip counters:
1. With the trip counters page displayed (Figure 2-15 ), use the or
button to highlight the required counter.
2. Hold down the button for 1 second to enter edit mode.
3. Use the or button to set the counter either (on) or (off) as
required.
4. Hold down the button for 1 second to save your setting.
5. Repeat steps 1 to 4 for each counter.
Setting race timers
Youcan set each race guntimerto any whole-minutevaluebetween1 and
15 minutes.
To set the race timer:
1. With the race timers page displayed s (Figure 2-16 ), use the or
button to highlight the required timer (GUN 1, GUN 2 or GUN 3).
D5946-1
81183_2 S7.book Page 14 Wednesday, May 7, 2003 1:52 PM
To Next Page
Loading...
