3-2-2 Section 3: Using Analog Instruments
ST290 Instrument System Owner’s Handbook
Digital display
You can select which information is displayed in the digital display. This
can be:
• True/Apparent Wind Speed.
• Velocity Made Good (VMG).
• Tack Heading.
• Maximum Wind Speed.
• Wind Alarm Data.
2.2 Operation
IMPORTANT
Do not use your Wind or Close Hauled Wind instrument until the
appropriate setup procedures in Section 7, Chapter 4, have been
satisfactorily completed.
Procedures
Figure 2-2 shows the button functions. Use this information, in
conjunctionwiththeinformationinFigure 2-3 , tooperateyour Windand
Close Hauled Wind instruments.
Figure 2-2: Basic operation
D5548-1
Tack heading
Velocity made good
Press to toggle between True & Apparent indications
Refer to Figure 2-3
81183_2 S3.book Page 2 Tuesday, May 6, 2003 8:41 AM
To Next Page
Loading...
