Raymarine St290 - Depth Chapter; Resetting Speed Values; Speed Chapter

Chapter 3: ST290 Data Display 2-3-5
ST290 Instrument System Owner’s Handbook
3.3 Chapter & page details
The salient points of the Data Display chapters and pages are
summarized here. Use the Glossary in Section 9 of this handbook as
necessary, for descriptions of abbreviations.
Speed chapter
The on-screen chapter title is SPEED and the pages are summarized in
Table 3-1 .
Resetting speed values
To reset the average speed, maximum speed or trip log value:
1. In the Speed chapter, select the appropriate page (AV SPEED, MAX
SPEED or TRIP LOG, as appropriate).
2. Hold down the button for 2 seconds. After 1 second the displayed
value flashes and after 2 seconds, it resets. AV SPEED and MAX SPEED
reset to the current speed. TRIP LOG resets to 0.
Depth chapter
The on-screen chapter title is DEPTH. The pages are summarized in
Table 3-2 .
Table 3-1: SPEED chapter pages
Page content Description
SPEED Boat speed, in knots (KTS), miles per hour (MPH) or kilometers per hour (K/H)
AV SPEED
Average speed since last reset, in KTS, MPH or K/H
MAX SPEED
Maximum speed since last reset, in KTS, MPH or K/H
TOTAL LOG
Total log, in statute miles (SM), kilometers (KM) or nautical miles (NM)
TRIP LOG
Trip log, in SM, KM or NM
VMG WIND in
Velocity made good to windward, in KTS, MPH or K/H
VMG TO WP
Velocity made good to waypoint, in KTS, MPH or K/H
81183_2 S2.book Page 5 Tuesday, May 6, 2003 8:39 AM