Raymarine St290 - Connections to DPU; Seatalk & Seatalk

6-2-8 Section 6: Installation
ST290 Instrument System Owner’s Handbook
5. Place thefixing holesover the screwheads,then movethe DPU down
so the screw heads are at the top of the keyhole slots.
6. Tighten the self-tapping screws to secure the DPU in position.
Connections to DPU
SeaTalk & SeaTALK
2
Connect SeaTalk and SeaTALK
2
cables to the DPU as shown in
Figure 2-9, DPU SeaTalk & SeaTALK2 connections.
Figure 2-9: DPU SeaTalk & SeaTALK
2
connections
D5564-1
SHIELD
RED
BLACK
WHITE
BLUE
SHIELD
RED
BLACK
WHITE
BLUE
RED
UNINSULATED
YELLOW
SeaTalk
SeaTALK
2
SeaTALK
2
81183_2 S6.book Page 8 Wednesday, May 7, 2003 11:27 AM