2-2-16 Section 2: Using Digital Instruments
ST290 Instrument System Owner’s Handbook
Alarm clock
Setting the alarm clock off/on
To turn the alarm clock off or on:
1. In the Timers chapter, select the ALARM CLOCK page.
2. Press the button momentarily to display either ON or OFF,as
required.
Setting the alarm time
To set the alarm time:
1. In the Timers chapter, select the ALARM CLOCK page.
2. Hold down the button for 1 second, to enter Edit mode. The min-
utes value flashes.
3. Use the or button to set the required minutes value in the alarm
time.
4. Press the button, to edit the hours.The hours value flashes.
5. Use the or button to either set the required hours value in the
alarm time,
6. Hold down the button for 1 second, to leave the edit mode.
ALARM CLOCK
Alarm clock
COUNTDOWN
Countdown timer
STOPWATCH
Stop watch
RACE START
Race start, gun 1 time
RACE START
Race start, gun 2 time
RACE START
Race start, gun 3 time
RACE TIMER
Count up timer
Table 2-7: TIMERS chapter pages
Page content Description
81183_2 S2.book Page 16 Tuesday, May 6, 2003 8:39 AM
To Next Page
Loading...
