Chapter 2: Setting Up Graphic Displays 7-2-17
ST290 Instrument System Owner’s Handbook
Position logging interval
The position logging interval page (see Figure 2-19 ) enables you to
define how often the ST290 system logs the boat’s position.
Figure 2-19: Position logging interval setup
With the POSITION LOGGING INTERVAL page displayed, use the or
button to highlight the interval you want. The options are 10MIN, 30MIN,
1HR, 6HR, 12HRand 24HR.
The selected value is set when you leave this page.
Setting remote control configuration
Theremotecontrolsetuppage(seeFigure 2-20 ) enables you to define the
remote group, the sequence within the remote group and the associated
Remote Keypad(s), for an instrument.
Note: The manner in which instruments are remotely controlled is de-
scribed in Section 4, Chapter 2.
Figure 2-20: Remote control setup
D6088-1
D6062-1
81183_2 S7.book Page 17 Wednesday, May 7, 2003 1:52 PM
To Next Page
Loading...
