6-2-18 Section 6: Installation
ST290 Instrument System Owner’s Handbook
Figure 2-17: Wiring a Pod
Fitted cable
1
Press transducer cable into cable channel
2
Press cable into the
cable channel and arrange
transducer wires over it
3
Connect transducer wires
4
D5547-1
SeaTALK
2
SeaTALK
2
If necessary, you can use both groups of
SeaTALK
2
connectors to daisy-chain Pods
81183_2 S6.book Page 18 Wednesday, May 7, 2003 11:27 AM
To Next Page
Loading...
