Raymarine St290 - Page 191

Chapter 2: Setting Up Graphic Displays 7-2-9
ST290 Instrument System Owner’s Handbook
Creating a new chapter
To create a new chapter:
1. With the chapter edit screen displayed, use the button to highlight
the name of the chapter immediately above the point at which you
want to insert a new chapter.
2. Use the or button to highlight NEW CHAP on the edit menu.
3. Hold down the button for 1 second. A new chapter is inserted
below the highlighted chapter.
Figure 2-10: Creating new chapter
Changing chapter name
To change the name of a chapter:
1. Use the button to highlight the chapter name you want to edit.
2. Use the or button to highlight EDIT on the chapter edit menu.
3. Hold down the buttonfor 1 second. The first character of the chap-
ter name flashes (see Figure 2-11 ) to indicate you can edit it.
Figure 2-11: Edit chapter name
D5839-1
Chapter edit menu
Use these to select
chapter edit option
D5840-1
Editable field
81183_2 S7.book Page 9 Wednesday, May 7, 2003 1:52 PM