Section 7. Component Procedures Model 8210/8250 Maintenance Manual
Tractor Covers Finish and Accessories
7-12 Publication: 1146945/001, Revised: 25 Sep 2018
4. Press downward on the cover corners to
make sure the bumper spring clips are
engaged.
Figure 7-16. Press to engage bumper spring clips
5. Insert the lower cover tabs (first on one
side and then the other) into the opening
created by the grille cover.
6. Inspect the gaps between the grille cover
and lower cover and the gaps between the
lower cover and the bumper to make sure
they are uniform.
Property of American Airlines
To Next Page