IMAGE FUSING AND PAPER EXIT
A265/A267 2-74 SM
2.10.6 FUSING TEMPERATURE CONTROL
Temperature Control
When the main power switch is turned on, the CPU turns on the fusing lamp to
maintain the fusing temperature of 180
°
C for the first job, or for the first 11
consecutive pages of printing. After that, the machine maintains the fusing
temperature at 170
°
C.
Note that the fusing temperature is higher if the user uses special paper in the 2
nd
tray or thick paper mode from the bypass tray (see Paper Feed – Special Paper).
To prevent each end of the hot roller temperature from becoming too high, the
machine lowers the fusing temperature to 155
°
C when it detects that paper which
is less than 216 mm width is consecutively fed.
100
50
200
170
180
Power On 1 job or 11 pages
Idling Enabled
ºC
155
A267D511.WMF
To Next Page
Loading...
