Ricoh Aficio 270 - Sg3-V34 (Function 17)

SERVICE LEVEL FUNCTIONS
A265/A267 4-14 SM
4.1.28 SG3-V34 (FUNCTION 17)
NOTE:
An optional G3 interface is required to access function 17.
1. SG3 Bit Switches
Please refer to section 4.1.2 for how to adjust bit switch settings.
1. Enter the fax service mode.
2. Press
) .
.
3. Press
)
.
4. Adjust the required bit switches.
5. Exit the service mode.
2. SG3 Memory Dump
1. Enter the fax service mode.
2. Press
) .
then
'
.
3. Enter the first fax digits of the start and
end addresses, then press “OK”.
4. Press
/
.
5. Exit the service mode.
A895M548.BMP
A895M549.BMP
A895M550.BMP