COPIER FEATURE EXPANDER INSTALLATION
A265/A267 3-38 SM
3.13 COPIER FEATURE EXPANDER INSTALLATION
!
CAUTION
Before installing this option, turn off the main switch and disconnect the
power cord, the telephone line, and the network cable.
NOTE:
If an expansion box was installed, remove it before starting the following
procedure.
1. Remove the connector cover [A] and rear cover [B], as shown (4 screws).
2. Attach the board [C] to the bracket [D] (2 screws).
3. Remove screw [E].
4. Install the board assembly [F] (3 screws, including screw [E]).
A887I704.WMF
A887I101.WMF
[A]
[C]
[F]
[D]
[B]
[E]
To Next Page
Loading...
