Ricoh Aficio 270 - Netware Networks; Setting up the Nib for Various Networks

SETTING UP THE NIB FOR VARIOUS NETWORKS
A265/A267 2-2 SM
2.3 SETTING UP THE NIB FOR VARIOUS NETWORKS
This section gives a summary of how to set up the NIB in various network
environments.
NOTE:
It is not recommended for service technicians to program network and
protocol parameters. Ask the customer’s network administrator to program
and manage these parameters.
2.3.1 NETWARE NETWORKS
The following parameters are required for NetWare networks.
Parameter
Novell 2.x/3.x/4.x/ (5.0)
Bindery Network
Novell 4.x / (5.0)
NDS Network
Protocol
(Default = Enabled)
Yes Yes
Operation Mode
(Default = Print Server)
Yes
(Print Server
or Remote Printer)
Yes
(Print Server
or Remote Printer)
Remote Printer No.
(Default = 0)
Yes (Note 1) Yes (Note 1)
Print Server Name Yes (Note 2) Yes (Note 2)
Print Server Password Cannot be programmed Cannot be programmed
File Server Name Yes No
NDS Context Name No Yes
Preferred NDS Tree No Yes (Note 3)
Print Queue Scan Rate Cannot be programmed Cannot be programmed
Frame Type
(Default = Auto-Select)
Yes Yes
Job Timeout
(Default = 15 s)
Yes Yes
Disable Bindery Cannot be programmed Cannot be programmed
NOTE:
1) ‘Remote printer number’ is necessary only when the “Operation Mode”
is “Remote Printer”.
2) ‘Print server name’ is necessary only when the “Operation Mode” is
“Print Server”. The default name is “RNPxxxxxx” (xxxxxx is the lower 6
digits of the MAC address).
3) The preferred NDS context must be typed in without a starting dot ( . ).
– OU=Development.O=Corp [OK]
– .OU=Development.O=Corp [NG]
– Development.Corp [OK]
– .Development.Corp [NG]
4) The following utilities can be used to change the settings.
– Printer Manager for Admin
– Web Status Monitor
– (Telnet)