SERVICE PROGRAM MODE 20 September 1999
A265/A267 4-70 SM
4.2.8 ORIGINAL JAM HISTORY DISPLAY (SP7-905)
After entering the SP mode, select “1” and press the “OK” or
#
key. The following
message is displayed.
1. Jam history number
2. Main motor operating time: Date
3. Hour
4. Minute
5. Second
6. Jam code (see the table below)
7. Original size
8. Total counter value at the original
jam occurred.
Jam Code Meaning
210 Original does not reach the registration sensor.
211 Original caught at the registration sensor.
212 Original does not reach the feed-out sensor.
213 Original caught at the feed-out sensor.
214 Original does not reach the inverter sensor.
215 Original caught at the inverter sensor.
216 Short interval between originals.
218 No original at the stamp.
NOTE:
The NVRAM can store data for up to 10 copy jams. If more than 10 copy
jams occur, the oldest data will be erased.
[Serviceman P-Mode]
Code: 210 A4
$
Prev. Next OK Exit
T.C 138
Jam rev.01 0:06:55:51
Org. Size:
A265M508.WMF
1
32 54
7
6
8