Printer
Controller
B306
INSTALLATION PROCEDURES
SM 3-9 A265/A267
3.4 POSTSCRIPT DIMM
!
CAUTION
Before installing this option, do the following:
1. Print out all data in the printer buffer.
2. Turn off the main switch and disconnect the power cord, the telephone
line, and the network cable.
1. When installing this option and the printer controller (G306) at the same time,
first remove the printer controller [A] from the expansion box [B]. Then go to
step 4.
2. Remove the cover [C] (1 screw).
3. Remove the printer controller [D] (2 screws).
B308I500.WMF
B308I502.WMF
[C]
[D]
[A]
[B]
To Next Page
Loading...
