Ricoh Aficio 270 - Copy Jam History Display (Sp7-903)

SERVICE PROGRAM MODE 20 September 1999
A265/A267 4-68 SM
4.2.6 COPY JAM HISTORY DISPLAY (SP7-903)
After entering the SP mode, select “1” and press the “OK” or
#
key. The LCD
panel will display the following message.
1. Jam history number
2. Main motor operating time: Date
3. Hour
4. Minute
5. Second
6. Jam code (see the table below)
7. Jam location
8. Paper feed station
9. Paper size
10. Total counter value at the jam
occurred.
Jam Code Meaning
001 Jams at power on.
010 Paper does not reach the registration sensor (from paper tray unit)
011 Paper does not reach the 1st relay sensor.
030 Paper does not reach the 2nd relay sensor.
031 Paper does not reach the 3rd relay sensor.
032 Paper does not reach the LCT feed sensor.
050 Paper does not reach the registration sensor (from by-pass unit)
070 Paper caught at the registration sensor.
121 Paper does not reach the exit sensor.
122 Paper caught at the exit sensor.
123 Paper does not reach the duplex entrance sensor.
124 Paper caught at the duplex entrance sensor.
125 Paper does not reach the duplex exit sensor.
131 Paper does not reach the bridge exit sensor.
132 Paper caught at the bridge exit sensor.
133 Paper does not reach the bridge relay sensor.
134 Paper caught at the bridge relay sensor.
149 Paper does not reach the 1 bin exit sensor
150 Paper caught at the 1 bin exit sensor.
Jam rev.01
JamB
[Serviceman P-Mode]
Code: 070 Feed3 A4
$
10:09:17:36
Prev. Next OK Exit
T.C 138
A265M507.WMF
1
32 54
7 98
6
10