Ricoh Aficio 270 - Appletalk (Ethertalk) Networks

Network
Interface
Board B307
INSTALLATION
SM 2-5 A265/A267
2.3.4 APPLETALK (ETHERTALK) NETWORKS
The following parameters are available for AppleTalk network printing.
Parameter Description
Protocol
(Default = Enabled)
Disable this if AppleTalk is not used.
Network No. The network number of the AppleTalk network to which the
NIB is connected is displayed.
Printer Name The Plug&Play name specified with SP5-907 appears
here. This can be changed using the Apple Printer Utility.
Printer Type “LaserWriter” is always displayed.
AppleTalk Zone The default AppleTalk zone name of the network is
displayed. This can be changed by sending the ZoneName
PS file to the NIB.