Ricoh Aficio 270 - Fcu Reboot; Ram Clear (Function 07); Service Station Fax Number (Function 09)

SERVICE LEVEL FUNCTIONS
A265/A267 4-8 SM
4.1.14 RAM CLEAR (FUNCTION 07)
1. Enter the fax service mode.
2. Press
( .
.
3. Press one of the following numbers, as required:
)
Initializes the bit switches and user parameters, user data in the SRAM,
files in the SAF memory, and the clock.
'
Erases all the files stored in the SAF memory.
*
Resets the bit switches and user parameters.
+
Initializes the bit switches and user parameters, user data in the SRAM,
and files in the SAF memory.
4. The machine automatically returns to standby mode after self-initialization.
4.1.15 FCU REBOOT
To initialize the fax unit without erasing files or resetting the bit switches, do one of
the following:
•
Hold down the “Speed Dial” key for more than 10 s, while the machine is in
facsimile mode. This initializes the fax unit only.
•
Remove the rear cover and press SW2 on the FCU. This initializes the fax unit
only.
•
Turn off the main power and operation switches and turn them back on. This
initializes the whole machine.
•
Hold down the
1
and
2
keys for more than 10 s. This initializes the whole
machine.
4.1.16 SERVICE STATION FAX NUMBER (FUNCTION 09)
1. Enter the fax service mode.
2. Press
( 3
.
3. Enter the fax number of the service station
that will receive Automatic Service Calls
from this machine. To use a G4 number,
press the “F4” key.
4. Press “OK”.
5. Exit the service mode.
A895M520.BMP
A895M521.BMP