SCANNER UNIT
A265/A267 6-2 SM
6.1.2 SCANNER EXTERIOR/OPERATION PANEL
1. Remove the ADF or platen cover.
2. Remove the exposure glass. (See Exposure Glass.)
3. Remove the upper front cover [A] (1 screw, 1 hook).
4. Remove the operation panel [B] (5 screws, 1 connector).
5. Remove the right cover [C] (1 screw, 2 hooks).
6. Remove the rear cover [D] (2 screws).
7. Remove the left cover [E] (2 screws, 2 hooks).
A267R002.WMF
[A]
[B]
[C]
[D]
[E]
To Next Page
Loading...
