Ricoh Aficio 270 - Rom History; Rom History - Bicu

ROM HISTORY 20 September 1999
A265/A267 4-84 SM
4.6 ROM HISTORY
4.6.1 ROM HISTORY - BICU
A265/A267 Firmware Modification History (BICU)
Description of Modification Firmware Level Serial Number
Firmware
Version
Initial Production A2675532 B From initial
production.
1.57
Corrects the following:
•
The machine goes into Energy
Saver Mode when the operator
presses the Energy Saver Mode
key while a print job is in
progress. However, when the
operator brings the machine out
of the mode and returns to
System Settings or Copy
Features (both inside user
tools), a message is displayed
asking the operator to wait and
the machine returns to the main
copy screen. At this time, the
LED for the user tools key is lit,
and all indicators except the
LCD report that the machine is
still in User Tools.
•
If the operator enters System
Settings or Copy Features (both
inside user tools) from Fax,
Printer or Scanner mode while a
duplex or staple copy job is in
progress, the “Copy in progress”
screen is displayed.
The message is still displayed
even if the operator presses the
User Tools Key to return to the
main copy screen after the copy
job finishes.
•
If a jam occurs while printing out
a counter report, the jam
indication is displayed but soon
disappears. The machine then
returns to the counter display
screen. In addition, if the paper
end condition occurs while the
paper is being fed, the machine
returns to the counter display
screen without properly
displaying “Set A4 (81/2 X 11)
paper in tray”.
A2675532 C October 1999
production.
1.64
Continued…
Rev. 04/2000