Ricoh Aficio 270 - Dtmf Test (Function 11)

SERVICE LEVEL FUNCTIONS
A265/A267 4-10 SM
4.1.19 V.34 MODEM TEST (FUNCTION 11)
1. Enter the service mode.
2. Press
) )
then
)
.
3. Press
+
.
4. Select a symbol rate and a data rate, then
press OK.
) – Select a symbol rate
' – Select a data rate
5. Press
/
to start the test.
To stop the test, press
&
.
6. Exit the service mode.
4.1.20 DTMF TEST (FUNCTION 11)
1. Enter the fax service mode.
2. Press
) )
.
3. Press one of the following numbers:
)"– D
TMF test (analog line)
*"–
DTMF test (ISDN line)
NOTE:
A G4 interface is required to test
DTMF tones on an ISDN line.
4. Press
'
.
5. Choose a DTMF signal type at the
keypad, then press
/
.
To stop the test, press
&
.
A895M526.BMP
A895M527.BMP
A895M528.BMP
A895M523.BMP
A895M524.BMP
A895M529.BMP