Ricoh Aficio 270 - Test Pattern Printing (Sp4-417 and Sp5-902)

SERVICE PROGRAM MODE 20 September 1999
A265/A267 4-60 SM
4.2.3 TEST PATTERN PRINTING (SP4-417 AND SP5-902)
1. Input the level 3 number for the test pattern you need.
2. Press the
!
(Interrupt) key on the display to access the copy mode display.
3. Select the required copy features such as paper size, image density, and
reproduction ratio.
4. Press the
"
key to print the test pattern.
5. After checking the test pattern, exit copy mode by pressing the
!
(Interrupt)
key again.
6. Exit SP mode.
No. Test Pattern (SP4-417)
0No Print
1 Vertical Lines (single dot)
2 Horizontal Lines (single dot)
3 Vertical Lines (double dots)
4 Horizontal Lines (double dots)
5 Alternating Dot Pattern
6 Grid Pattern (single dot)
7 Vertical Stripes
8 Grayscales (Horizontal)
9 Grayscales (Vertical)
10 ID Patch
11 Cross Pattern
12 Argyle Pattern
13 Trimming Area
14 Vertical Lines (double dots) - SBU
15 Grid Pattern (single dot) - SBU
16 16 Grayscales - SBU
No. Test Pattern (SP5-902)
0No Print
1 Vertical Lines (single dot)
2 Horizontal Lines (single dot)
3 Vertical Lines (double dots)
4 Horizontal Lines (double dots)
5 Grid Pattern (single dot)
6 Grid Pattern (double dots)
7 Alternating Dot Pattern
8 Full Dot Pattern
9 Black Band
10 Trimming Area
11 Argyle Pattern
12 Grayscales (Horizontal)
13 Grayscales (Vertical)
14 Grayscales (Vert./Hor.)
15 Grayscales (Vert./Hor. Overlay)
16
Grayscales with white lines
(Horizontal)
17
Grayscales with white lines
(Vertical)
18
Grayscales with white lines
(Vert./Hor.)