ROM UPDATE
SM 6-13 A265/A267
Replacement
Adjustment
A895
6.4.4 SG3 BOARD MODEM ROM DOWNLOAD
This function updates the SG3 board modem ROM using a flash memory card.
1. Turn off the machine and remove the cover [A] (1 screw).
2. Connect the flash memory card [B] to the card slot as shown.
NOTE:
SW1 below the card slot must be OFF.
3. Turn on the machine and enter the fax service mode.
4. Press
"
(
then
)
.
5. Press
$
. If the switch setting is correct,
the message on the right appears. Then
go to the next step.
6. Press
%
.
7. After the machine updates the SG3 modem ROM data, turn off the machine
then disconnect the flash card.
8. Turn the machine back on.
9. Print the system parameter list to check if the new ROM version is printed.
A895R505.WMF
A895R540.BMP
A895R542.BMP
SW1
[A]
[B]