ROM UPDATE
A265/A267 6-8 SM
6.4 ROM UPDATE
6.4.1 FCU ROM DOWNLOAD
This function updates the FCU firmware using a flash memory card.
1. Turn off the machine and remove the cover [A].
2. Connect the flash memory card [B] to the card slot as shown.
NOTE:
SW1 below the card slot must be
ON
.
3. Turn on the machine and enter the fax service mode.
4. Press
"
#
then
"
.
5. Press
"
.
If the switch setting is correct, the
message on the right appears.
Then press OK and go to the next step.
If the switch setting is wrong, or if the tool
is not connected correctly, the message
on the right appears. Then turn off the
machine and retry the procedure again.
A895R506.WMF
A895R524.BMP
A895R525.BMP
A895R526.BMP
SW1
[A]
[B]
To Next Page
Loading...
