Ricoh Aficio 270 - Ncu Parameters (Function 06); Ram Dump (Function 06)

SERVICE LEVEL FUNCTIONS
SM 4-7 A265/A267
Service
Tables
A895
4.1.12 NCU PARAMETERS (FUNCTION 06)
1. Enter the fax service mode.
2. Press
( -
.
3. Press
'
.
4. Move the cursor to the target parameter
using the arrow keys, then enter a new
value at the ten-key pad.
5. Exit the service mode.
4.1.13 RAM DUMP (FUNCTION 06)
1. Enter the fax service mode.
2. Press
( -
.
3. Press one of the following numbers as
required:
*
– G3 memory dump list
+
– G4 memory dump list
NOTE:
An optional G4 interface is required
to print the G4 memory dump list.
4. Enter the first four digits of the start and end
addresses, then press “OK”
Example: Start at 680000, end at 6801FF
- 0 ( ( - 0 ( )
“OK”
5. Press
/
.
6. Exit the service mode.
A895M515.BMP
A895M518.BMP
A895M515.BMP
A895M517.BMP