SERVICE MENU
A265/A267 4-2 SM
SERVICE TOOLS
Title Description
H HDD Test Verifies the FAT and directory entries on the HDD.
I HDD Format Partitions and formats the HDD.
L NIB Read/Write Backs up the NIB NVRAM and restores it.
4.3 SERVICE MENU
4.3.1 BIT SWITCH PROGRAMMING
1. Enter the Printer SP mode, and select “1. Service Menu”.
2. Select A, B, C, or D for the desired bit switch, then press [Enter].
3. Press [Enter] in the “Bit Switch Set” menu.
4. Adjust the bit switch using the following keys.
• [UP] [DOWN]: Change the switch setting and moves to the next bit.
• [CANCEL]: Exit without saving changes.
• [ENTER]: Exit and save changes.
5. Press [Enter] to save changes and exit.
BIT SWITCHES
NOTE:
The bit switches are not used at the moment.
To Next Page
Loading...
