Ricoh Aficio 270 - Pc Protocol Dumplist (Function 05); Ram Display and Rewrite (Function 06)

SERVICE LEVEL FUNCTIONS
A265/A267 4-6 SM
4.1.10 PC PROTOCOL DUMPLIST (FUNCTION 05)
NOTE:
An optional PC fax expander board (PCFE) is required to print the PC
protocol dump list.
1. Enter the fax service mode.
2. Press
/ ,
.
3. Press
*
then
/
.
4. Exit the service mode.
4.1.11 RAM DISPLAY AND REWRITE (FUNCTION 06)
1. Enter the fax service mode.
2. Press
( -
.
3. Press
)
.
4. Enter the start address of the RAM area to
be displayed, then press “OK”.
5. Move the cursor to the target address using
the arrow keys, then enter a new value (0-9:
Ten-key pad, A-F: Quick Dial keys).
6. To scroll through the RAM addresses:
Press “Prev”. or “Next”.
To jump to another address: Press “OK”, and go back to step 3.
7. Exit the service mode.
A895M511.BMP
A895M514.BMP
A895M515.BMP
A895M516.BMP
A895M517.BMP