Ricoh Aficio 270 - Auto off Mode; Disabling Auto off Mode; Entering Auto off Mode; Returning to Stand-By Mode

ENERGY SAVER MODES
A265/A267 2-80 SM
2.11.4 AUTO OFF MODE
Auto off mode is used only if the optional fax or printer unit is not installed.
Entering auto off mode
The machine enters auto off mode when one of the following is done.
•
The auto off timer runs out after the last job (SP 5-904 or User Tools – System
Settings – Auto Off Timer: default setting is 60 min)
•
The operation switch is pressed to turn the power off
What happens in auto off mode
When the machine enters auto off mode, the operation switch (USA) or the main
power switch (Europe/Asia) turns off automatically. The fusing lamp and all dc
supplies except +5VE (+5V for energy saver mode) turn off. At this time, only the
main power LED is lit.
Returning to stand-by mode
The machine returns to stand-by mode when the operation switch (USA) or the
main power switch (Europe/Asia) is pressed.
Operation
Switch
Energy Saver
LED
Fusing Temp. System +5V Note
Off Off
Room Temp.
(Fusing lamp off)
Off
Only +5VE is
supplied to the
BICU.
Disabling auto off mode
If the user wishes to disable auto off mode, use the following user tool: User Tools
– System Settings -10 – AOF (change the setting to ‘OFF’).