SCANNER FUNCTIONS
A265/A267 18-6 SM
3. INSTALLATION PROCEDURE
!
CAUTION
Unplug the main machine’s power cord before starting the following
procedure.
NOTE:
Before doing the following steps, the printer controller (B306) must be
installed.
When installing the scanner controller and the printer controller (B306) at the same
time, skip step 1.
1. Remove the application cover [A] (1 screw)
2. Install the optional SIMM memory [B] on the scanner board if it is required.
3. Short TB4 [C] on the scanner board with jumper [D].
A844I602.WMF
A844I600.WMF
A844I601.WMF
[C]
[D]
[A]
[B]
To Next Page
Loading...
