Scanner Unit
A844
SCANNER FUNCTIONS
SM 18-7 A265/A267
4. Remove the plate [A] from the expansion box (2 screws).
5. Install the scanner controller board [B] in the right-most slot of the expansion
box [C] (2 screws).
6. Cut away the cover [D] from the application cover [E].
7. Reinstall the application cover (1 screw).
8. Remove the mode key cap. Then install the key tops [F] and decal [G]
depending on the machine configuration, as shown.
A844I504.WMF
A844I503.WMF
[A]
[B]
[C]
[D]
[E]
[F]
[G]
To Next Page
Loading...
