Ricoh Aficio 270 - Hdd (Optional); Job Reset; Menu Reset; Reset Operations

Printer
Controller
B306
DETAILED SECTION DESCRIPTIONS
SM 2-9 A265/A267
2.3.8 RESET OPERATIONS
Job Reset
This resets the job being processed and ignores all incoming data until a data end
is received.
If a collate job or a proof print job is being printed, the controller stops printing and
deletes the file from the RAM or HDD.
System Reset
This initializes the collation data, proof print data, fonts and macros downloaded to
the RAM. The menu settings, NIB settings, system log data, and error codes
remain unchanged.
NOTE:
Do not use this when the controller is receiving a print job.
Menu Reset
This resets all the menu settings to their default values, including the NIB settings.
2.3.9 HDD (OPTIONAL)
The optional 1.6 GB HDD has three partitions.
• The Proof Print partition uses 600 MB for proof print file storage.
• The Collation partition uses 500 MB for collation data storage.
• The last partition uses 500 MB for font and macro storage.
500 MB
500 MB
600 MB
Proof Print Partition
Collation Partition
Font/Macro Storage
B306D504.WMF