Ricoh Aficio 270 - Output Tray Selection; Paper Size Mismatch

Printer
Controller
B306
DETAILED SECTION DESCRIPTIONS
SM 2-5 A265/A267
Paper Size Mismatch
When the controller could not find the specified paper size and paper type in any of
the trays, the machine displays an error message.
Then the user can either load the requested paper size and paper type in a tray or
select another tray, e.g., a tray that contains A4 size paper, by pressing the “Form
Feed” key.
The controller will print the job if the specified paper size and paper type are
detected in a tray, or if the user presses the Enter key after selecting a tray.
2.3.3 OUTPUT TRAY SELECTION
Output Tray Priority in the System User Tools specifies the default paper output
tray for each application.
If a print job does not specify an output tray or if the driver specifies the default tray,
the default tray is used.
If the driver specifies an output tray, this overrides the default tray setting in the
user tools.
If the option one-bin tray is selected but it is not working, the standard output tray is
used.